Determination of mineral components in tobacco
Determination of mineral components in green tea
Determination of mineral components in dry leaves

Determination of mineral components in dry plant materials by laser elemental analyzer LEA-S500

(dry leaves, fodder, dry biofuel, tea, tobacco, etc.)
Elemental analyzer LEA-S500 can be used successfully for solving biochemical and agrochemical tasks

The technique developed by the specialists of SOL instruments allows to carry out measurements of 22 elements in dry leaves, fodder, mixed fodder, dry biofuel, vegetable crops, vitamin-mineral complexes and other objects.

Lower detection limits of most elements amount to ppm, detection limits for some elements amount to fractions of ppm. Expressivity of the method, minimal sample preparation provide wide possibilities for environment monitoring, including plant objects and food.

Samples with already known chemical composition can serve as calibration samples, availability of CRM or standard samples of a manufacturer allows of careful control of measurement accuracy.

Detectable elements and their min element concentrations measured in dry vegetable samples

No.Detectable elementMinimal measured mass fraction of element, %
NameSymbol
1BariumBa0.001
2ZincZn0.0005
3AluminumAl0.0001
4StrontiumSr0.0001
5BoronB0.0001
6CalciumCa0.001
7LeadPb0.00005
8PotassiumK0.01
9MolybdenumMo0.0001
10MagnesiumMg0.01
11ZirconiumZr0.0001
12SodiumNa0.003
13SiliconSi0.01
14TitaniumTi0.0001
15PhosphorusP0.01
16VanadiumV0.00005
17ChromiumCr0.0002
18CobaldCo0.00002
19IronFe0.0001
20CopperCu0.00005
21NickelNi0.0002
22ManganeseMn0.0001
  • 1. Ba (Barium): minimal measured mass fraction of element = 0.001 %

  • 2. Zn (Zinc): minimal measured mass fraction of element = 0.0005 %
  • 3. Al (Aluminum): minimal measured mass fraction of element = 0.0001 %
  • 4. Sr (Strontium): minimal measured mass fraction of element = 0.0001 %
  • 5. B (Boron): minimal measured mass fraction of element = 0.0001 %
  • 6. Ca (Calcium): minimal measured mass fraction of element = 0.001 %
  • 7. Pb (Lead): minimal measured mass fraction of element = 0.00005 %
  • 8. K (Potassium): minimal measured mass fraction of element = 0.01 %
  • 9. Mo (Molybdenum): minimal measured mass fraction of element = 0.0001 %
  • 10. Mg (Magnesium): minimal measured mass fraction of element = 0.01 %
  • 11. Zr (Zirconium): minimal measured mass fraction of element = 0.0001 %
  • 12. Na (Sodium): minimal measured mass fraction of element = 0.003 %
  • 13. Si (Silicon): minimal measured mass fraction of element = 0.01 %
  • 14. Ti (Titanium): minimal measured mass fraction of element = 0.0001 %
  • 15. P (Phosphorus): minimal measured mass fraction of element = 0.01 %
  • 16. V (Vanadium): minimal measured mass fraction of element = 0.00005 %
  • 17. Cr (Chromium): minimal measured mass fraction of element = 0.0002 %
  • 18. Co (Cobald): minimal measured mass fraction of element = 0.00002 %
  • 19. Fe (Iron): minimal measured mass fraction of element = 0.0001 %
  • 20. Cu (Copper): minimal measured mass fraction of element = 0.00005 %
  • 21. Ni (Nickel): minimal measured mass fraction of element = 0.0002 %
  • 22. Mn (Manganese): minimal measured mass fraction of element = 0.0001 %
LEA-S500 for solving biochemical and agrochemical tasks
Laser elemental analyzer LEA-S500 manufactured by SOL instruments – a unique system for elemental analysis of a wide range of applications

Publication date: 3 October 2013.

You may also be interested in:

Help & Support

contact us